rs232 in a box has been designed for engineers trying to sort out the ever-trying problems associated with rs232 hardware. these problems are usually associated with non-standard interfaces - commonly found during product development. rs232 in a box contains all the basic information and hardware required to connect equipment together. various adapters are provided to enable gender and 25/9 way cables and connectors to interface. an rs232 mini tester is provided to assist in unscrambling the tx, rx, cts, dtr pins etc. a pair of 9 way d connectors with screw terminals are included to enable custom interface patches to be quickly tested prior to making up the final cable. the rs232 in a box also comes with a booklet describing the interface, protocol, problems and solutions and some application ideas for custom testers. these testers - 300 baud repeater, mouse stick, data logger, xon/xoff tester and ascii monitor - are based on the pic micro and source code is provided on the accompanying 3.5" disk. rs232 in a box is supplied in a rugged carrying case to help ensure the contents are not lost or damaged. rs232 in a b ox bluebird electronics suite 2, townsend barn poulshot, devizes wilts sn10 1sd 01 380 827 080 email info@bluebird-electronics.co.uk http://www.bluebird-electronics.co.uk
|